The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade.  It can handle any type of radial component regardless of lead diameter, pitch and form. 

 

The upper plate thickness comes at a standard .125" (3.2mm)

 

Additional plates can be ordered to increase the height, starting from .019" (0.5mm). 

Two versions are available:                    

 

TP/LN-500/1 

Cutting area 2.09x1.7" (53x43mm)
 

TP/LN-500/2 

Cutting area 2.09x3.66" (53x93mm)  
                             

The standard grid pattern accommodates most types of components. 

Special grid pattern plates can be provided upon request.