VIP:6级
价格:未填
品牌:OBERON
发货:3天内

• 剪切稳定(在高温下提供最佳润滑效果)
• 高TIMKEN EP (ASTM D- 2509:65 磅)
• 较佳泵功能(通过TRABON集中润滑油系y测试)
• 特长使用期限 (ASTM D-3527:276 小时)
• 优异防锈功能 (附加防生锈及氧化抑制剂)
• 优异防水功能 (ASTM D- 1264: 华氏175度下1.76%水分洗除)
• 高落点 (ASTM D- 2265;华氏520度)
• 可弹性封垫 (氯丁橡胶、NITRILE、HYTREL、硅)

• 底盘
• 输送机 
• 钢磨机 
• 纸磨机
• 转轴
• 公路外配额
• 工业机械
• 抗摩擦轴
• 建筑配置
• 商业用途

OBERON G38 MULTI PURPOSE, EXTREME PRESSURE BEARING LUBRICANT (Super Grease) DEscriptION Oberon G38 is blended with heavy oil, extreme pressure additives plus rust and oxidation inhibitors. Oberon G38 has a heavier oil viscosity, is more adhesive and can be successfully used in areas wher water contamination is probable or slow moving heavy loads are encountered. Oberon G38 is typically used in manufacturing machineries. CHARACTERISTICS Extreme Temperature Performance  Ordinary greases soften easily when operating temperatures rise. Oberon G38 is specially formulated to give superior performance and protection at elevated temperatures (it features a high dropping point of 520ºF). Oberon G38 will lubricate longer at higher temperatures than lithium/lithium complex greases. At the same time, it provides excellent low temperature performance. Heavier Oil Viscosity  Water interferes with the lubricating process and causes corrosion in moving joints. Water can enter bearings when seals are inadequate or when the lubricant lacks sufficient adhesiveness. Oberon G38 has a heavier oil viscosity and is more adhesive so it can be successfully used in areas wher water contamination is probable or slow moving heavy loads are encountered. Exceptional E.P. Properties  Oberon G38 possesses outstanding load carrying capacity and works well under shock loading conditions. By resisting severe and constant impact, Oberon G38 allows bearings to function without hindrance thus protecting against expensive wear and premature equipment failure. It passed the ASTM D-2509 Timken OK Load of an extremely high 65 lbs! It also has an extremely low 4-Ball Wear of 0.4mm (ASTM D-2266) Superior Shear Stability  Oberon G38 is formulated with a shear stability designed to provide optimum lubrication under harsh working conditions. Oberon G38 will not wash out in water or bleed at high pressure but will hold on tenaciously to working parts. Better Pumpability  Oberon G38 can be used in centralised lube systems - even when exposed to cold temperatures. It passed the Trabon Centralised Lube System Test with flying colours. Excellent Corrosion Resistance  Unlike lithium/lithium complex greases that are high in sulphur content, Oberon G38 is engineered to withstand higher extreme pressure loads without using corrosive type additives. It is fortified with effective rust inhibitors that provides maximum corrosion protection.  Environmentally Friendly  Oberon G38 is developed from New Polyurea Technology that is specially designed to create lubricants that are safe for the environment and easily biodegradable.  APPLICATION  Oberon G38 provides effective protection and lubrication for indoor manufacturing machineries, chassis, construction equipment, paper mills, steel mills conveyors, off road equipment industrial machinery, fleet and commercial applications.

importANT This information related only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of OBERON’s knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user’s responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. Oberon Manufacturing Company Pte Ltd reserves the right to modify or change this product for purpose of improving its performance characteristics.

specifications	STOCK
Packing in barrel
G37  5kg	4
G38  5kg	4
G38  15KG	3
G53  15KG	3
G55  15KG	15
F232 VG220 5L	2
F232 VG220 10L	6
Grease in tube
G38   400G	40
G53   400G	200