行业分类
电阻电容剪脚成型Type C 043 E
日期:2014-11-23 17:27  点击:248
 
 
VIP:7级
价格:未填
品牌:BURST & ZICK
发货:3天内
 

Burst & ZICK Cutting and Forming Machine
Type C 043 E

 

Device
 

Components

Bauteil Bauteil Bauteil Bauteil Bauteil
Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil Bauteil
 
Specification  
- dimension
840 x 480 x 450 mm
- weight
approx. 45 kg
- electrical
230 V / 50 Hz / 200 W
- bending tool
horizontal and vertical bendings
- min. pitch
horizontal: 7,5 mm, vertical: 2,5 mm
- max. pitch
horizontal: 50 mm, vertical: 5 (7,5) mm
- lead Ø horizontal: 0,4 to 1,3 mm, vertical: up to 0,8 mm
- components taped
- production rate 8.000 pcs/hr (continuously variable)
- Option - manual supplyment for lose components
  - pre-set and item counter
  - survey for component-roll or ammo-pack

 

Description:

The Burst & Zick machine Type C 043 E is designed, to cut stamp and bend axial leaded components for both horizontal and vertical mounting.

To make the insertion of components with short leads into p. c. boards possible, the leads have to be cut to suitable length, bend to the required pitch and -if necessary- stamped.
Both, suitable length and required pitch can be adjusted by adjusting screws. After this set-up the components can be processed. Option: the adjustments can be checked by a digital display.

The stamping result for the leads depends on the used tool. These tools can be manufactured to meet customer requirements. The machine can be re-set for the different tools.

The taped components can be processed automatically. The processing-speed is continuously variable. The tool change for different bending dimensions takes about 2 minutes.

联系方式
公司:Burst & Zick GmbH 中国区代理
发信:点此发送
姓名:张咫萦(先生)
电话:021-61993083
手机:18601789208
地址:上海浦东金港路333号1628室
邮件:champion@champion.sh.cn
关于网站  |  普通版  |  触屏版  |  网页版
11/14 04:44
首页 刷新 顶部