行业分类
Cutting Bending Type C 034
日期:2014-11-23 17:07  点击:224
 
 
VIP:7级
价格:未填
品牌:BURST & ZICK
发货:3天内
 

BURST & ZICK Cutting and Bending Device Type C 034

 

Device components

 

Bauteil

 
Specification  
- dimension 200 x 200 x 280 mm
- weight approx. 6 kg
- compressed air 4 to 6 bar
- min. pitch C 034 S: 12,5 mm
C 034 MIL: 7,5 mm
- max. pitch C 034 S: 100 mm
C 034 MIL: 100 mm
- lead Ø C 034 S: 0,8 to 1,4 mm
C 034 MIL: 0,4 to 0,8 mm
- components loose or belted (manual suplied)
- operation manual via pneumatic Foot pedal
- production rate 2.500 pcs/hr

 

Description:

The Burst & Zick Device Type C 034 is designed to cut and bend the leads of axial components to a 90° configuration. Because of the independent adjustments for the lead span, the left cut length and right cut length, the device allows a wide variety of processing parameters.

The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and bend to the required form. The processed component is then rejected by the front of the device.

联系方式
公司:Burst & Zick GmbH 中国区代理
发信:点此发送
姓名:张咫萦(先生)
电话:021-61993083
手机:18601789208
地址:上海浦东金港路333号1628室
邮件:champion@champion.sh.cn
关于网站  |  普通版  |  触屏版  |  网页版
11/27 08:41
首页 刷新 顶部