价格:未填
品牌:BURST & ZICK
发货:3天内
BURST & ZICK Solder lug inserting device with tape feeder Type A 040/B
Specification
Specification
- dimension 320 x 600 x 600 mm
- weight approx. 20 kg
- electrical 230V / 50 Hz / 100W
- compressed air 3,5 to 4,0 bar
- magazin 300 bis 400 solder lugs (threaded on wire)
- production rate one per second
remark: Insertion Device Type A 040/R for solder lugs out of a conveyor
Description:
The solder lug insertion device Type A 040 is designed to insert pre-stored solder lugs into p. c. boards. The components are supplied automatically to the device, and will be pressed into the p. c. board by an air cylinder. Therefore, the p. c. board has to be held to the setting position manually, and a tracer finger then triggers the setting process.
The inserting device will handle all usual in the trade solder lugs, which are lined up on wire or adhesive tape. Replacing the insertion head and the bin makes it possible, to process solder tags with different dimensions and forms. The re-tooling is easy, and takes only a few minutes.