产地：德国
机器将电容插件的一个引脚折弯180度。解决电容器件容易极性被放反的问题。
| Specification |
Components   |
|
| - dimensions | 650 mm x 450 mm x 500 mm | |
| - weight | approx. 35 kg | |
| - electrical | 230 V / 50 Hz / 110 W | |
| - control | Siemens-SPS "S7-200" | |
| - pneumatic | 6 bar | |
| - pitch | min. 2,5 mm; max. 7,62 mm | |
| - tape holepitch | 12,7 mm und 15 mm | |
| - lead Ø | 0,4 mm to 0,8 mm | |
| - components | taped | |
| - delivery | reel or ammopack | |
| - rate | 3.600 pcs/hr | |
|
Description: The C O93 was designed to produce a "J" bend to one lead of a component that has polarity. CO93 incorporates a touch tool that ensures a specific lead length ± 0.1 mm even if the components are not taped to an exact tolerance. Optionally, the CO93 offers a C Tester that can test the components for correct polarity prior to the forming station and remove them if they fail. Because the CO93 only accepts components on tape, either reeled or ammo pack formats are acceptable. Also because of its flexibility, the CO93 allows the processing of components taped on 12.7 mm and 15 mm spacing by using easy-to-change tape guides and tools. Options: |
||
