点击图片查看原图
Cutting- and Forming Device Type C 052 B
|
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
|||||||||||||
|
Example of use |
|||||||||||||
|
component forms |
|
||||||||||||
| Specification | ||
| - Dimensions | 350 x 100 x 200 mm | |
| - Weight | ca. 15 kg | |
| - Compressed air | 4 bis 6 bar | |
| - Pitch | min. 3,5 mm (2,5 mm on inquiry) max. 25 mm |
|
| - Wire Ø | max. 0,8 mm | |
| - Operation | pneumatic | |
|
Description: The Burst & Zick GmbH model C052/B is designed to cut and form radial components with 2 leads. A variety of form shapes are possible through the use of interchangeable die sets. Two Bending forms can be choosed:
The die sets can be manufactured to customer specification. The triangular shaped center die allows components with lead spans from 3.5 mm to 20 mm to be processed on a single die. Adjustments are provided for the placement and exaggeration of the form. Easy to operate, the C052/B offers an economical solution to quality forming of loose, radial components. |
||
