Fully automatic cutting and bending machine for axial components
|
|||
The features of the G3-Cutter:
|
Art-No.: 15600.G3-D |
||
Processing Samples | |||
Basic machine - Control unit: Siemens TP177micro | |||
The basic machine is equipped with manual, continuously variable adjustments of:
The axis values are shown on the control panel Siemens TP177 micro. The axis values as well as the axis numbers are well shown on the display.
The setup precision is 0.1 mm. The maxis values can not be stored therefore the data’s have to be stored manually to guaranty the reproduction of the geometry. Following advantages remain by the digital values:
|
5.5 Inch - bluemode
|
||
OPTION 1 - Panel Siemens TP177B | |||
All digital models of the G3 can be delivered or upgraded with the more powerful control panel SIEMENS TP 177B.
Following advantages compared to the basic machine:
·The setup values of the axis can be saved in a program.
·There are 6 different geometric forms shown in 6 separate databases:
1Horizontal cut and bend
2Horizontal crimped and bend
3Vertical cut and bend
4Vertical crimped and bend
5Only cut
6Special components
·Each database can store 200 programs.
·The axis numbers on the screen correspond to the written numbers on the machine. This gives the operator a better overview.
·Process reliability: The production can just be started if the positions of all axes correspond to the position of the chosen program.
·Also during production the axes are permanently checked, is the position of one axe changing, the machine stops its process.
·Additional data’s can be stored in the database ( Gripper size, Crimping tools, Bending tools) so all necessary information to reproduce a specific component is certain 100%.
·New programs can be written very simply. There is one button needed to write all position data’s into the recent recipe.
·A Barcode reader over USB can be used to call up in a simple way the program of your choice.
·Error and failure messages give detailed information about what is happening in the machine and what has to be done to avoid or to solve the problem.
|
5.5 Zoll - farbig
Art-Nr.: 15600.G3-D.TP177B
|
||
OPTION 2 - Panel Siemens MP277 | |||
The most powerful control unit for the G3-Cutter is the Multipanel MP277 from Siemens.
Following features and benefits to the TP177B:
|
8 Inch - Colour
Art-No.: 15600.G3-D.MP277
|
||
OPTION 3 - Variable crfimping position (6. Axe) | |||
This option is for a G3-D Cutter to adjust the lead length below the PCB. With this option the machine receives an additional axis, the 6th axis of the machine.
This option is very helpful for production with variations in lead length after the PCB and/or different PCB thicknesses.
The machine can not be upgraded by this option.
|
|||
OPTION 4 - CCP - Component Chain Feeding | |||
An additional device for the G3-D Cutter to process loose components.
The basic package of the machine includes a simple tool called LCF (Loose Component Feeding) to feed loose components.
With the simple LCF tool is a production of 1000-1500 pcs per hour feasible, depending on the quality of the raw material and the size of the component.
If you have to produce everyday several thousand loose components, we recommend using the CCF device. The device can be mounted within less than 5 minutes to the G3-D Cutter.
The CCF device feeds the components with a toothed chain into the machine. The chain is a perfect clean and long life feeding solution. The user just has simple to place the component body between the two chains of the transport.
|
BKZ montiert auf einer G2-D Cutter
|